Tag Archives: Onboarding

How to put each device into Pairing Mode

There are several different B-hyve devices, and not all of them are put into their pairing mode the same way. This article will show you how this is done for each device. Putting your timer in pairing mode is very important when initially pairing your device to the B-hyve app, but it can also assist…Read More »

How To Pair Your B-hyve XD Timer (Bluetooth Only)

This article will walk you through pairing your B-hyve XD Hose Faucet Timer. A couple of things you’ll need to know before we get started: This is pairing for Bluetooth only. Click here to be directed to Wi-Fi Pairing Using Bluetooth only, you won’t have access to features such as “Smart Watering” and “Automatic Rain Delays” In…Read More »

B-hyve XD Pairing with Wi-Fi

This article will walk you through pairing your B-hyve XD timer to your Wi-Fi Network. A couple of things you need to know before pairing: You will need a Gen 2 Hub in order to pair, the Gen 1 hub for the B-hyve hose timers will not work with the B-hyve XD. If you’re attaching…Read More »

How to Wire a Timer

Each valve should have two wires coming off of the solenoid. One wire will be connected to a common wire (usually a white-colored wire) along with every other valve. The common wire is attached to the COM terminal on the timer (there are multiple common terminals, it doesn’t matter which it goes in). The second…Read More »

How To Pair your B-hyve Indoor Smart Watering Timer

This Article will walk you through pairing your B-hyve Indoor Smart Watering Timer. This video shows how to pair a B-hyve indoor underground timer to the B-hyve WiFi app. Doing so will give you total control of your timer and unlock the many smart watering features, automatic rain delays and remote watering from anywhere in…Read More »

How To Pair Your B-hyve Hose Faucet Smart Watering Timer (Bluetooth)

This Article will walk you through pairing your B-hyve Smart Watering Timer (Bluetooth).  -First things first, you’ll need to know the restrictions of using Bluetooth instead of Wifi.  -You will need to be in Bluetooth range (about 50 ft) in order to use the B-hyve Hose Faucet Controller. -You need to have a Bluetooth compatible…Read More »

How To Pair Your B-hyve Smart Flood Sensor and Hub

This article will walk you through pairing your B-hyve Smart Flood Sensors with their Hub. A couple of things you need to know before pairing: Your network name (SSID) and password are required You need a Gen 2 Hub in order to pair, the hub for your Hose Faucet timers will not work. You’ll need…Read More »

How To Pair Your B-hyve XR Indoor/Outdoor Smart Watering Timer

This article will walk you through pairing your B-hyve XR Indoor/Outdoor Smart Watering Timer.   First, make sure your controller is in pairing mode (indicated by the pulsing Blue Center button, and the “Pairing” on the left display segment. If this is not showing, then try unplugging your controller for 30 seconds and then plugging it back…Read More »

Which devices are supported? B-hyve

For our B-hyve devices, In order to use them properly, you need an Android/iOS device that is compatible with them. For iOS We currently support iPhone, iPad and iPod Touch running iOS 13 and above. (Bluetooth 4.0+) For Android Android version 5 and higher. (Bluetooth 4.0+) Smart Watches are not supported at this time Back…Read More »

This website uses cookies to ensure you get the best experience.