Category Archives: Public

How do I delete a custom Program?

Sometimes you may have a program you don’t want to use any longer. Deleting the program is a fairly simple process. To delete a program Go to the “Programs” page. You’ll now see the programs page with all of your active programs. Tap “Saved Programs” to get an entire list of all of your programs. Locate the…Read More »

How do I add zones to my system?

To add a zone to the timer, you first need to wire the valve into the timer. Each valve should have two wires coming from the solenoid. One wire from the valve will go into the common terminal, and the other wire will go into the numbered terminal. In the app, go to the “Zones” page. Tap “Edit”…Read More »

How do I wire my Pump Start Relay?

Our relay is an “open circuit” electric switch that is used to connect high voltage (120/240 VAC) from a high voltage source to a pump or other high voltage circuit. The relay/switch is operated (turned on) by connecting a 24 VAC source to the two blue wires connected to the relay coil. Most timers do…Read More »

Which devices are supported? B-hyve

For our B-hyve devices, In order to use them properly, you need an Android/iOS device that is compatible with them. For iOS We currently support iPhone, iPad and iPod Touch running iOS 13 and above. (Bluetooth 4.0+) For Android Android version 5 and higher. (Bluetooth 4.0+) Smart Watches are not supported at this time Back…Read More »

I need to change to the Metric System

Swapping your system between Metric and Imperial systems is simple and we will walk through it here! Note: This will apply to all timers on the account, not just a single timer. In the app, go to “My B-hyve” Select “B-hyve Account”  Great! Now look for “Units” at the bottom of the page Tap either Imperial or Metric and then back…Read More »

B-hyve indoor/outdoor 1st GEN iOS pairing (ABC model)

If you have the B-hyve Indoor/outdoor timer (First GEN model) and you are trying to pair your device using an iOS phone/tablet, then this article will help with getting your timer connected to your home WiFi. First-Time Setup First-Time Setup Make sure the timer is plugged in and powered on. Verify that the Wi-Fi connection…Read More »

B-hyve Indoor/outdoor 1st Gen Android Pairing (ABC model)

If you have the B-hyve Indoor/outdoor timer (First GEN model) and you are trying to pair your device using an Android phone/tablet, then this article will help with getting your timer connected to your home WiFi. First-Time Setup Make sure the timer is plugged in and powered on. Verify that the Wi-Fi connection signal in…Read More »

This website uses cookies to ensure you get the best experience.