This article will go over several scenarios to help find out what firmware issue you may be seeing, and then help direct you to help identify and solve the problem. If you are saying the following: “I installed a firmware update and now I can’t connect to my B-hyve device” “The update won’t finish/install” “The…Read More »
Tag Archives: connectivity
This article will go over several scenarios to help find out what transfer issue you may be seeing, and then help direct you to help identify and solve the problem. If you are saying the following: I’ve moved into a new house which has a B-hyve device, how do I connect to it? My house…Read More »
How to reconnect the B-hyve XR and Indoor Timer when changing routers: 1. In the app, tap My B-hyve then Devices. 2. Tap on the Timer then Update WiFi Settings. 3. The timer will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again. 4….Read More »
In this article, we will go over some troubleshooting steps for both our wired and our wireless Rain/Freeze Sensors. Hard Wired Rain Sensors When a hard wired sensor is connected to a timer it can be tested on most timers by turning the sprinklers on manually from the timer. Push the “test stem” down that…Read More »
How to reconnect the Flood Sensors & WiFi Hub when changing routers: 1. In the app, tap My B-hyve then Devices (if you only have Flood Sensors, My B-hyve may be called Settings). 2. Tap on the WiFi Hub then Update WiFi Settings. 3. Your app will look for your Hub and automatically connect to…Read More »
How to reconnect the 1st-Gen Indoor/Outdoor Timer when changing routers: For iOS: 1. Put your timer into pairing mode by rotating the dial to off and pressing the reset button (located inside the swing panel) for 10-12 seconds. 2. Tap My B-hyve and then Devices. 3. Choose Indoor/Outdoor Timer. 4. You will need to…Read More »
How to reconnect the 2nd-Gen Indoor/Outdoor Timer when changing routers: 1. In the app, tap My B-hyve then Devices. 2. Tap on the Timer then Update WiFi Settings 3. The B-hyve device will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again. 4….Read More »
How to reconnect the Smart Hose Timer & WiFi Hub when changing routers 1. In the app, tap My B-hyve then Devices. 2. Tap on the WiFi Hub then Update WiFi Settings. 3. Your app will look for your hub and automatically connect to it. 4. The Hub will look for available WiFi networks to…Read More »
There are several different B-hyve devices, and not all of them are put into the pairing mode the same way. This article will show you how this is done for each device. Putting your timer in pairing mode is very important when initially pairing your device to the B-hyve app, but it can also assist…Read More »
Notifications will alert you of the following events: a rain delay is set a rain delay is suggested watering has completed there is a freeze warning there has been a timer fault your device has been set to OFF Notifications are set and sent based on the account you are currently logged in to, regardless…Read More »