The following troubleshooting steps are intended to help with common issues such as: WiFi & Bluetooth connectivity Battery Life not reporting correctly The date and time aren’t correct Device is non-responsive Rebooting the B-hyve Device Rebooting your device can help with connectivity issues, as well as any display issues. For underground timers: Unplug it from…Read More »
Tag Archives: b-hyve
How to reconnect the Smart Hose Timer & WiFi Hub when changing routers 1. In the app, tap My B-hyve then Devices. 2. Tap on the WiFi Hub then Update WiFi Settings. 3. Your app will look for your hub and automatically connect to it. 4. The Hub will look for available WiFi…Read More »
How to reconnect the B-hyve XR and Indoor Timer when changing routers: 1. In the app, tap My B-hyve then Devices. 2. Tap on the Timer then Update WiFi Settings. 3. The timer will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again. 4….Read More »
How to reconnect the 2nd-Gen Indoor/Outdoor Timer when changing routers: 1. In the app, tap My B-hyve then Devices. 2. Tap on the Timer then Update WiFi Settings 3. The B-hyve device will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again….Read More »
How to reconnect the 1st-Gen Indoor/Outdoor Timer when changing routers: For iOS: 1. Put your timer into pairing mode by rotating the dial to off and pressing the reset button (located inside the swing panel) for 10-12 seconds. 2. Tap My B-hyve and then Devices. 3. Choose Indoor/Outdoor Timer. 4. You will need to…Read More »
How to reconnect the Flood Sensors & WiFi Hub when changing routers: 1. In the app, tap My B-hyve then Devices (if you only have Flood Sensors, My B-hyve may be called Settings). 2. Tap on the WiFi Hub then Update WiFi Settings. 3. Your app will look for your Hub and automatically…Read More »
To create a rain delay from the B-hyve app first you want to go to the home page and select “Rain Delay” From here three options will come up: – 12 hours – 24 hours – 2+ days If you select either the 12 or 24 hours option, then your timer will then be set to…Read More »
In this article we will go over how to create a program for your timer in the B-hyve app that has a Start and End date. This can be very useful if you want to have a program only run for a select amount of days or months and then turn itself off automatically. The…Read More »
Calendar Page The calendar allows you to see both when and where your timer will water and when and where it has already watered. Details such as which zone(s) and how long each zone was watered, soil moisture levels, and rainfall are all available. Watering Forecast Go to the calendar, select a day in the…Read More »
Devices Page The Device Page will show you every Device you have on your account, the MAC ID of those devices, and the status of each timer. If you were to tap on a device, it’ll take you to the device detail page. Here, there are quite a few things you can do with…Read More »