Tag Archives: Underground Timer

How to factory reset your B-hyve device

There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »

How to program your timer

If you are looking for help with programming your Orbit or B-hyve timer, then this article should help. This article contains links to both our Orbit and B-hyve line of timers and will help you in programming your device to fit your needs. Please check below to find an article to fit your needs. *Note:…Read More »

Resolving Connection Issues

This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to the most relevant article to help identify and solve the problem. If you are saying the following: “I can’t connect to Wi-Fi / Bluetooth” “I’ve changed my Internet provider / Router…Read More »

Programming Basics

Want to take full advantage of your underground sprinkler timer?  This may be the guide for you.  What are stations and zones? A station or zone refers to a group of sprinklers attached to the same valve.  Your timer will turn on the valve to let water flow to the sprinklers in that zone/station.  The…Read More »

How to reconnect the 1st-Gen Indoor/Outdoor Timer to a new router (Or after a change to your router settings)

How to reconnect the 1st-Gen Indoor/Outdoor Timer when changing routers:  For iOS:  1. Put your timer into pairing mode by rotating the dial to off and pressing the reset button (located inside the swing panel) for 10-12 seconds.  2. Tap My B-hyve and then Devices.  3. Choose Indoor/Outdoor Timer.   4. You will need to…Read More »

How to reconnect the 2nd-Gen Indoor/Outdoor Timer to a new router (Or after you change your router settings)

How to reconnect the 2nd-Gen Indoor/Outdoor Timer when changing routers:  1. In the app, tap My B-hyve then Devices.   2. Tap on the Timer then Update WiFi Settings   3. The B-hyve device will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again….Read More »

How to reconnect the B-hyve XR and Indoor Timer to a new router (Or after a change to your router settings)

How to reconnect the B-hyve XR and Indoor Timer when changing routers:  1. In the app, tap My B-hyve then Devices. 2. Tap on the Timer then Update WiFi Settings. 3. The timer will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again. 4….Read More »

How to put each device into Pairing Mode

There are several different B-hyve devices, and not all of them are put into their pairing mode the same way. This article will show you how this is done for each device. Putting your timer in pairing mode is very important when initially pairing your device to the B-hyve app, but it can also assist…Read More »

How to Manually Water from Your B-hyve Underground Timer

Need to water your yard, but don’t have your phone handy? This article will help with running your underground B-hyve timer manually. B-hyve Indoor Smart Timer Water All Zones Press and hold the B-hyve button. Release the B-hyve button when the upper right display shows A (for All Stations) and your manual watering will begin…Read More »

How to troubleshoot a timer not operating valves

Here is a guide to troubleshooting your system when the sprinklers aren’t turning on, even though the timer says they’re running. There can be a few different possible causes when this issue occurs. First, we need to be sure the sprinkler wire from the valve(s) is fully inserted in the terminal. You will want to…Read More »

This website uses cookies to ensure you get the best experience.