Tag Archives: Connect

How To Pair Your B-hyve XR Indoor/Outdoor Smart Watering Timer

This article will walk you through pairing your B-hyve XR Indoor/Outdoor Smart Watering Timer.   First, make sure your controller is in pairing mode (indicated by the pulsing Blue Center button, and the “Pairing” on the left display segment. If this is not showing, then try unplugging your controller for 30 seconds and then plugging it back…Read More »

How To Pair Your B-hyve Smart Flood Sensor and Hub

This article will walk you through pairing your B-hyve Smart Flood Sensors with their Hub. A couple of things you need to know before pairing: Your network name (SSID) and password are required You need a Gen 2 Hub in order to pair, the hub for your Hose Faucet timers will not work. You’ll need…Read More »

Will my B-hyve controller still run its scheduled programs if it loses WiFi connection?

If you have your B-hyve device programmed to run the watering schedule that you set, if the device were to lose connection to WiFi then it would still continue to run these programs as scheduled. You will not be able to control the device or make any schedule adjustments while the controller is offline if…Read More »

No Option to Move to Device Group for Hose Timer

If you are trying to move your B-hyve Hose Timer to the device group of another device, and you are not seeing the option please try the following steps. From the “Home” page of the B-hyve app select the “My B-hyve” button. Then select “Devices”. Now you should be able to find your hose timer and select it. Once you…Read More »

B-Hyve Hose Timer Disconnects from Bluetooth Often

If your B-hyve Hose Timer is frequently disconnecting from Bluetooth, then this article should help with that. The B-hyve hose timer has a Bluetooth range up to 150 feet, but this can be lower if there are any walls, floors or anything else that might disturb the signal in between you and your hose timer. If…Read More »

Gen 2 B-hyve Indoor/Outdoor Timer (ABCD version) Not finding the OrbitSmartHome Network

If your Gen 2 B-hyve Indoor/Outdoor timer is asking you to connect to your timers “OrbitSmartHome Network”, then this article will help with getting your timer connected to your WiFi. The first step should be to take a look at your timer and find the button that says either “PROG ABCD” or “PROG ABC”. If your timer says “PROG ABC” then…Read More »

B-hyve Flood Sensor FAQ

What mobile devices are supported? Android and Apple devices are supported; Android 5.0 and up, iOS 13 and up. Can I use my flood sensor outside? The flood sensor is designed for indoor use only. How close does my flood sensor need to be to the hub? The range can be affected or reduced by…Read More »

B-Hyve Hose Faucet Controller – Offline

If your B-hyve hose faucet timer has gone offline, then this article will help to get it reconnected to your WiFi network. Troubleshooting Tips When your timer goes offline, this normally has to deal with the hub. Here are some steps that you can take to get your hub re-connected. Simply Update Wi-Fi Settings in…Read More »

B-Hyve Indoor Controller– Offline

If your B-hyve indoor controller has gone offline, please use the following steps to help with getting it reconnected to your WiFi. Power Cycle controller A lot of the time, a simple power cycle of the controller will reconnect your controller. To do this, unplug your controller for 3-5 seconds, and then plug your controller…Read More »

This website uses cookies to ensure you get the best experience.