In this video, we will be onboarding a 12-station Orbit B-hyve Indoor/Outdoor Sprinkler timer to the Orbit B-hyve app. This is for the second-generation indoor/outdoor timer, which can be identified by having the PROG ABCD button on the local interface. If your timer has a PROG, ABC button, that is a first-generation indoor/outdoor timer and…Read More »
Tag Archives: indoor-outdoor
To create a program from the Indoor/Outdoor B-hyve timer, you’ll need to set the start times, run times, and the frequency of the program. Set the Start Time Turn the dial until the selection box is on Start Time Press the dial. You will now see 1st Start Time in the display Press the dial…Read More »
While both generations of the B-hyve Indoor/Outdoor timers look almost identical, they have 2 main differences. You can tell the difference by looking at the PROG button on the timer. If it says ABC, it’s a 1st-Gen and the ABCD is the 2nd-Gen. The letters stand for how many programs can be created. The second difference…Read More »
Updating Wi-Fi Settings Reconnecting your timer to your Wi-Fi network. If your timer has lost connection to your Wi-Fi network, or you’ve changed routers/internet providers, the timer will need to be reconnected to the router. Put your timer into “Pair Mode” by rotating the dial to “off” and pressing the reset button (located inside the swing…Read More »
This article will walk you through pairing your B-hyve Indoor/Outdoor Smart Watering Timer. A couple of things you need to know before pairing: B-hyve timers will only connect to 2.4 GHz networks. If your network has a “blended” network, it will need to be separated. Network name (SSID) and password are required We recommend mounting…Read More »
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »
If you are looking for help with programming your Orbit or B-hyve timer, then this article should help. This article contains links to both our Orbit and B-hyve line of timers and will help you in programming your device to fit your needs. Please check below to find an article to fit your needs. *Note:…Read More »
If you’re experiencing an issue with the button(s) not working on your Orbit device, then this article can help with troubleshooting. We’d like to have you try power cycling the Orbit device. Half the time, a simple power cycle of the device will help address this issue. To do this, unplug your device for 10-15…Read More »
Need to water your yard, but don’t have your phone handy? This article will help with running your underground B-hyve timer manually. B-hyve Indoor Smart Timer Water All Zones Press and hold the B-hyve button. Release the B-hyve button when the upper right display shows A (for All Stations) and your manual watering will begin…Read More »
In this article, we will help with reconnecting your B-hyve devices once you’ve installed a new router/made any changes to your router settings. For all of our devices except the B-hyve XR, you’ll need to make sure that your new router can broadcast a 2.4 GHz band separate from any 5 GHz network – otherwise,…Read More »
- 1
- 2